Dimensions
Performance
Standard Features |
|
|
|
|
|
|
Manufacturer
|
|
Raymond
|
Raymond
|
Crown
|
Hyster
|
Model Designation |
|
|
|
|
|
Capacity |
|
|
|
|
|
Voltage |
|
|
|
|
|
Wheels (x = driven) |
|
|
|
|
|
Where Manufactured |
|
|
|
|
|
Dimensions |
|
Raymond
SA-CSR30T
|
Raymond
SB-CSR30T
|
Crown
|
Hyster
|
Head Length [1] |
|
|
|
|
|
Maximum Elevated Height |
|
|
|
|
|
Capacity Reduced Above (El. Ht.) |
|
|
|
|
|
Minimum Clear Aisle [2] |
|
|
|
|
|
Minimum Intersecting Aisle |
|
|
|
|
|
Performance |
|
Raymond
SA-CSR30T
|
Raymond
SB-CSR30T
|
Crown
|
Hyster
|
Travel Speed Empty |
|
|
|
|
6.4 |
Travel Speed Loaded |
|
|
|
|
|
Lift Speed Empty |
|
|
|
|
|
Lift Speed Loaded |
|
|
|
|
|
Lift Speed Auxiliary Empty |
|
|
|
|
|
Lift Speed Auxiliary Loaded |
|
|
|
|
|
Lowering Speed Empty |
|
|
|
|
|
Lowering Speed Loaded |
|
|
|
|
|
Lowering Speed Auxiliary Empty |
|
|
|
|
|
Lowering Speed Auxiliary Loaded |
|
|
|
|
|
| |
|
|
|
|
|
Traverse Speed |
|
|
|
|
|
Standard Features |
|
Raymond
SA-CSR30T
|
Raymond
SB-CSR30T
|
Crown
|
Hyster
|
Wire Guidance Manufacturer |
|
|
|
|
|
Mast Options |
|
|
|
|
|
Power Steering |
|
|
|
|
|
Fuel Gauge w/Lift Interrupt |
|
|
|
|
|
Speed Control |
|
|
|
|
|
UL Label Type "E" |
|
|
|
|
|
UL Label Type "EE" |
|
|
|
|
|
Notes:
[1] Head Length to traverse carriage.
[2] Based on 48in. (1219 MM) L x 40 in. (1016 MM) W load.
Minimum aisle will increase with elevated height.
[3] Information not available.
[4] Minimum aisle is 66 in. (1676 mm) with optional telescoping
forks.
[5] 17 plate battery. With 21 plates dimension is 115.3
in. (2929 mm).
[6] Hyster has 10 in. (254 mm) turret thickness and will
quote reduced aisle clearances below 360 in. (9144 mm).
[7] Maximum travel speed is limited to 1 mph above 372
in. (9448 mm0 fork elevation.Travel speed is reduced to 1 mph when Aux.Mast
is raised approximately 31 in.(787mm).
[8] For truck equipped with rail guidance add 24 in. (610
mm), with wire guidance add 48in. (1219 mm).
[9] Raymond intellispeed control system allows faster
travel speeds at elevation based on load weight, load handler position,
travel direction, guidance mode, and operator request.
[10] TN mast is standard, TF mast is optional.
[11] Hyster model V30XMU is marketed under the Yale model
designation NTA030SA. |
Note: Competitive information has been
gather from the manufacturer's promotional information and is subject
to change without notice. |
|
